Cugher’s solutions for
the Automotive industry
All Cugher dryers comply with the highest energy standards and are designed as an integral part of the line, with the possibility to study and realize different temperature curves in each module, to ensure an improved productivity.
The Cugher Dryers are manufactured with the best existing materials to guarantee the maximum reliability of the line.
The drying technology of Cugher IR Dryer combines the effectiveness of the Infrared lamps and the air blades, in order to distribute the heat uniformly and obtain a better and quicker curing of the ink. The conveyor speed can be regulated to meet Customer productivity targets.
The Power Saving features, allows the operator to adjust the lamps power to the real necessities for each type of processed glass, avoiding useless power consumption.
The power data can be stored in to a recipe that can be easily recalled by the operator panel.
In order to avoid any damages, the glasses are transferred by means of special Kevlar belts.
Inside the cold module, there is a controlled air circulation, which allows cooling of the glasses up to a temperature approximately of 30°C higher than the ambient temperature.
Cugher Digital UV Dryers are equipped with dedicated anti-reflection shields, placed on the dryer’s inlet and outlet, to protect the operators from the UV radiation, allowing safe operations.
An innovative digital control system for lamps management allow power saving and productivity increase.
IR/UV Combi dryers
Cugher Combi Dryers are composed by three sections.
The first section is an IR dryer with hot modules, the second section is a UV dryer, while the last section is an IR dryer with cold modules (cooling section). When the UV dryer section is used, the first and third sections will operate as a conveyor, while when the IR dryer operation is requested, it will be the UV section to operate as a conveyor.
HOT SWAP FAN
The fans can be replaced with the oven in production.
FAN ROTATION CONTROL KIT
This kit allows to have an alarm in case of breakage of the pulley of the propellers of the hot section of the dryer.
To obtain lower glasses outlet temperatures, approximately between 25°C and 35°C, the cold modules of the dryers can be equipped with a cooling device (Chiller unit plus thermal exchangers).
This kit is useful to verify the temperature of the glass at the exit of the hot section and at the exit of the cold section.
Cugher provides the right technological solution for the production.
Your trusted partner for projects from scratch, integration and maintenance.
You need more informations?
Please don’t hesitate to contact us.
You need assistance?
Contact our Customer service.