Cugher’s solutions for
the Automotive industry

YOU NEED A QUOTE?
We will assist you in the best way

Ask for a quote →

Download Area 

G Series – Shuttle Transport System

The G Series printing machines transport the glasses through a shuttle with two independent cross shaped holders and centring out of the printing table. This solution enables reaching the maximum speed of the printing process for glasses with small and medium dimensions.
The system consists in one cross shaped holder with a vacuum cups system. The glass is collected by the walking beam while it is still in the centring device of the inlet conveyor; thanks to this operation it is possible to transport the glass with great accuracy. No further glass registrations are necessary before the printing process.

J Series – Belt Transport System

The J Series provides transport through a flat belt conveyor designed for glasses with medium and large dimensions, as well as for drilled glasses.
The glass sheet arriving from the entry conveyor is transferred to the center of the printing table through motorized belts.
The belts will lower to printing table level, centring procedure and printing process will be performed, then the belts will lift for glass transportation to the exit synchronized conveyor.

Logo Print Station

The Logo Print Station is a special equipment composed by a booking conveyor and a logo print system that, working jointly, are able to center and print the logo on the underneath glass.
The movement is given by pneumatic linear guide.
It is possible to adjust the squeegee and flood bar speed independently.
The up and down vertical movements of the Squeegee /Flood bar group are obtained by dedicated cylinder.
The Logo Print Station is equipped with its own PLC.

Automatic Centring System

• The system allows to insert into the recipe system the position of each pin
• The operator can also define the pins’ closing sequence, allowing the centering of extremely shaped glasses
• The precision of the centering systems can guarantee repeatability accuracy of +/- 0,08 mm.
• Glass dimension control, with alarm in case of out of tolerance range glass
• Automatic print stroke setting

Cugher provides the right technological solution for the production.
Your trusted partner for projects from scratch, integration and maintenance.

You need more informations?
Please don’t hesitate to contact us.

May we help you ?
Contact our Customer service.

You Need a quote? We will support you in the best way